A — Refrigerator error code

Thermador E13 — Freezer defrost sensor drift

Complete diagnostics and troubleshooting guide for Thermador refrigerator error code E13. Learn what it means, what causes it, and whether you need professional repair.

Severity Medium Repair Needs technician Components Defrost NTC sensor, wiring, defrost board

Daniel Hernandez Master Appliance Technician

Schedule repair 1-844-9023945

B — Quick facts

E13 at a glance.

Error code E13

Appliance type Refrigerator

Severity Medium

Repairability Needs technician

Affected components Defrost NTC sensor, wiring, defrost board

C — Diagnosis & repair

Understanding error code E13.

Freezer defrost sensor drift

What Thermador E13 error means on your refrigerator

Thermador refrigerator error code E13 indicates: Freezer defrost sensor drift. This is classified as a Medium-severity issue — the appliance may continue operating but should be serviced soon.

What E13 means on a Thermador Refrigerator

Freezer defrost sensor drift. This error indicates a problem with the Defrost NTC sensor, wiring, defrost board.

Severity: Medium

This is a Medium-severity issue. The appliance may still function but should be serviced soon.

Repairability: Needs technician

This repair requires a certified Thermador technician with the proper diagnostic tools and genuine OEM parts.

Affected components

Defrost NTC sensor, wiring, defrost board.

When to call a technician

If basic troubleshooting (power reset, visual inspection) doesn’t resolve the error, contact a certified Thermador repair technician. Our technicians carry genuine OEM parts and Thermador-specific diagnostic tools.

Error E13 quick reference

Error code: E13
Appliance type: Thermador Refrigerator
Severity: Medium
Repair type: Needs technician
Affected components: Defrost NTC sensor, wiring, defrost board

Troubleshooting Thermador E13 step by step

Power reset: Turn off the appliance at the circuit breaker for 5 minutes, then restore power. If E13 clears and doesn’t return, a transient electrical issue caused it.
Visual inspection: Check for obvious issues — loose connections, visible damage, water leaks, or unusual sounds from the affected components (Defrost NTC sensor, wiring, defrost board).
Document the error: Note when E13 first appeared, whether it’s constant or intermittent, and any other symptoms (sounds, smells, performance changes).
Check related systems: Error codes can sometimes be triggered by adjacent systems — verify that water supply, electrical connections, and ventilation are functioning normally.

Professional diagnosis and repair

If E13 persists after a power reset, professional diagnosis is required. Our certified Thermador technicians use factory diagnostic tools to read stored error history, test individual components (Defrost NTC sensor, wiring, defrost board), and identify the exact failure point.

Repair typically involves:

Retrieving and analyzing stored fault codes from the control board
Component-level testing of the Defrost NTC sensor, wiring, defrost board
Replacing failed components with genuine Thermador OEM parts
Verifying the repair by running a test cycle and confirming the error clears

Preventing Thermador E13 from recurring

While some component failures are age-related and unavoidable, regular maintenance reduces the likelihood of error E13 recurring:

Follow the maintenance schedule in your Thermador owner’s manual
Keep the appliance clean — debris and buildup accelerate component wear
Address minor issues early — small problems left unrepaired often trigger error codes
Use a surge protector — power fluctuations can damage electronic control boards

For complete specifications and troubleshooting documentation, visit the Thermador official site. To schedule certified Thermador refrigerator repair, Schedule service online — we service all Thermador models in all 50 states with genuine OEM parts and a 30-day labor warranty.

Frequently asked questions about Thermador refrigerators

Why does Thermador use dual compressors?

Each compartment (fridge and freezer) gets its own compressor and sealed circuit. This prevents flavor transfer between compartments, provides independent temperature control, and means a failure in one compartment doesn’t affect the other.

What are Freedom Columns?

Freedom Columns are modular full-height refrigerator, freezer, wine, and ice maker units that install flush with cabinetry. Each column operates independently with its own compressor. You configure them to match your needs — a 36″ fridge column + 24″ freezer column, for example.

How often should I replace the water filter?

Every 6 months, or when the filter indicator turns on. A clogged filter reduces ice production and water dispenser flow rate.

What temperature should I set?

Refrigerator: 37°F (3°C). Freezer: 0°F (-18°C). Use a standalone thermometer to verify — don’t rely solely on the display reading.

How do I clean the condenser coils?

Every 6 months, use a coil brush or vacuum with brush attachment. On built-in models, access is through the front toe-kick panel. Clean coils maintain cooling efficiency and reduce compressor workload.