Service available now · 50 states Mon–Sun · 7AM–9PM EST
Tips & Tricks Cooktop

Thermador Cooktop Pan Size Tips for Gas and Induction

TL;DR: On a Thermador cooktop, use a flat-based pan that sits level and centered and suits the burner or zone. On induction the base must also be magnetic and cover most of the zone. Burner and zone sizes come from your model page and manual.

Updated Nov 18, 2026 5 min read
TL;DR: On a Thermador cooktop, use a flat-based pan that sits level and centered and suits the burner or zone. On induction the base must also be magnetic and cover most of the zone. Burner and zone sizes come from your model page and manual.

The right Thermador cooktop pan size is one that sits flat and centered over the burner or induction zone and fits the zone without hanging far over the edge or leaving most of it uncovered. On a gas cooktop that keeps the flame under the pan and the handle out of the heat. On an induction cooktop it also decides whether the cooktop detects the pan at all. This guide gives practical pan size tips for the three Thermador 36-inch cooktops we list, the gas SGS365TS, the gas SGSX365CS with a center wok burner and the induction CIT365YM, and explains how to use the bridge zone and the large burners.

SGS365TS36-inch gas, 5 Star Burners, ExtraLow simmer, continuous cast-iron grates
SGSX365CS36-inch gas with a center wok burner, 5 Star Burners, ExtraLow
CIT365YM36-inch induction, 5 zones including a bridge zone, touch controls
Gas: pan fitFlat base, centered, flame under the pan and not licking the sides
Induction: pan fitMagnetic, flat base that covers most of the zone
Zone and burner sizesFrom the page for your model and its manual

How does pan size affect cooking on a gas Thermador cooktop?

On a gas cooktop the flame heats the base of the pan. If the pan is much smaller than the burner, the flame wraps around the sides of the pan, wastes heat, can overheat a handle and can scorch the food at the edges. If the pan is much larger than the burner, the center cooks and the outer area stays cooler, and a heavy overhang can make the pan unstable. A good starting point is a pan whose flat base is about as wide as the burner or a little wider, sits level on the grate and is centered on the burner.

The SGS365TS and SGSX365CS pages describe Star Burners and continuous cast-iron grates, which let you slide a pan from one burner to another. Slide it carefully, because heavy pans can scratch the grate or tip. Our guide on how the Star Burner works explains the burner shape, and the page for SGS365TS lists the features of that cooktop.

What pan size works for ExtraLow simmering?

Both gas models list ExtraLow, the very low simmer setting. For gentle simmering, a smaller pan with a flat base and a lid usually works best on a smaller burner, because the heat is concentrated under the pan and not spread out. Use a pan that does not rock, and stir sauces that thicken. We do not give a simmer temperature, because our pages do not publish one for the cooktops. Our ExtraLow simmer tips show how owners use the setting for chocolate, sauces and delicate dishes.

Avoid a thin pan with a warped bottom on a low flame, because it creates hot spots under the food. If the pan wobbles on the grate, it is the wrong pan for that burner.

A side view of a frying pan centered on a cooktop burner with its handle turned inward
A flat-based pan centered on the burner keeps heat under the food.

How do you use the center wok burner on the SGSX365CS?

Our model page describes the SGSX365CS as a 36-inch gas cooktop with a center wok burner. Check the manual for the wok shape and any ring it names for that burner, and use only those, and do not place a wok on a regular burner unless it sits stable. A pan or wok that does not sit firmly on the grate can tip with hot oil or liquid in it. Our wok burner tips explain how to cook on it safely.

The large burner puts out a lot of heat. Keep handles turned inward, away from the front where they can be bumped, and keep towels, sleeves and paper well away from the flame. Use oil carefully. If oil in a pan catches fire, turn off the burner, cover the pan with a lid and do not pour water on it.

What pan size and type work on the CIT365YM induction cooktop?

An induction zone needs the right pan, not just the right size. Our induction cookware guide says the base must be magnetic, must sit flat on the glass and should cover most of the cooking zone, and that very small pans may not be detected. Test a pan with a magnet: if it sticks firmly to the bottom, the pan should heat; if it does not, no setting will make it work. Cast iron, enameled cast iron, magnetic stainless steel and many clad pans work, while pure aluminum, copper and glass do not unless they have a magnetic base. See induction cookware tips for more.

The CIT365YM page lists five zones including a bridge zone. A bridge zone links two zones so that a large or oblong pan, such as a griddle or a roasting pan, can be heated across both. How to activate it and which pans are intended for it is explained in the manual for your cooktop, and we do not describe the button sequence. Use a flat-bottomed pan sized for the bridged area, and lift the pan instead of sliding it so you do not scratch the glass.

What about 36-inch versus 48-inch cooktops?

Searches for a Thermador cooktop 36 or 48 are often about how many pans fit at once. The cooktops we list are 36 inches wide. Do not assume the pan sizes, zone sizes or the number of pans that fit are the same on a different width; look at the model page and the manual for the one you own or are considering. A wider surface is helpful when you use several large pans, but each burner or zone still has its own appropriate pan size.

When you place pans, leave space between them, and keep large pans off the control area. Our cooktop cleaning tips help you keep the surface and grates in good shape so pans sit properly.

When should you call a technician?

Call if a burner will not light, the flame looks uneven, a zone does not detect a pan that passes the magnet test, the cooktop displays a code or you notice cracked glass. If you smell gas, do not turn anything on or off and do not light anything; leave the house and call your gas company or 911 from outside. Do not remove the grates or burner parts beyond what the manual allows. We are an independent repair company, not Thermador. See our Thermador cooktop repair page, or schedule a visit online.

Frequently asked questions
What size pan should I use on a Thermador cooktop?
Use a flat-based pan that sits level, is centered on the burner or zone and is not far smaller or larger than it. Check your manual for the burner or zone sizes.
Why does my induction zone not detect my pan?
The pan may not be magnetic, may not sit flat or may be too small for the zone. Test it with a magnet.
What is the bridge zone on the CIT365YM?
Our page lists a bridge zone among the five zones. It links two zones for a large or oblong pan; your manual explains how to turn it on.
Can I use a wok on a Thermador gas cooktop?
The SGSX365CS has a center wok burner. Use a stable wok or ring as your manual describes.
When should I call a technician?
When a burner will not light or the cooktop will not detect a suitable pan. You can book a visit online.

Schedule Thermador
appliance repair

Experienced technicians in all 50 US states. Average response within 24 hours.

  • Experienced Thermador specialists
  • Genuine OEM parts
  • 30-day labor warranty
  • Upfront pricing
Need professional help?

Book experienced Thermador
appliance repair

On-site diagnostics, genuine OEM parts, 30-day labor warranty. Service in all 50 US states.